Products

Order Solar Power Products Online

Unirac Bottom-Mount Clips

Unirac Bottom-Mount Clips

Bottom-mounting clips allow you to attach modules to rails prior to final installation and are well suited for modules that must be pre-wired. Bottom-mounting clips also do not require the 1" space between modules needed by top clamps, allowing the array to be slightly smaller. If using bottom-mounting clips with L-feet, follow the installation manual carefully to ensure that footing slots are accessible during final installation.

With bottom-mounting clips, spacing between the rails depends on spacing between the mounting holes of your particular PV module, and is unlikely to match rafter spacing when rails are mounted parallel to rafters. In this case, a stringer over the roof or mounting blocks beneath the roof between the rafters will be required. As with any mounting system, never attach footings to the sheathing alone – it is violation of the building code, and the roof and array may incur severe damage from wind.

Order 4 clips for each module in your array. Clips are packed with stainless steel bolts and flange nuts. For use with all modules that have mounting holes on the backs of their frames.


Unirac Bottom-Mount Clips

Model Description Wt. (lbs) Item code

302000C

20 ea. Bottom mount clips

5

014-00875

Order Solar Power Products Online