Sine wave

MM-Series Sine Wave Inverter/Charger

The MMS Series sine wave inverters provide a cost-effective solution for smaller power needs in mobile applications. The MMS is smaller, lighter and less expensive while retaining all the built-in protection and reliability of ME and MS models. The MMS charger has a PFC (power factor corrected) charger, which is 85% efficient. The MMS1012G model comes with a flexible cord on the AC input and a GFCI outlet for easy connection to AC appliances. Great for mobile or emergency applications. Just connect to a 12VDC battery, and you have clean sine wave power anywhere. Optional MMS-RC-25 remote control available. The MMS Series is ETL Listed to the stringent requirements of UL/cUL 458, CSA C22.2 #107.1-01 and meets the KKK-A-822E standard. Made in USA.

MS-Series Sine Wave Inverter/Chargers

The MS Series inverter/charger is a sine wave inverter designed for the most demanding mobile and off-grid applications. The MS Series inverters are powerful, easy to use, and are available in 12-, 24- and 48-volt versions. The MS4024 can be series stacked, using the ME-SSI, for 120/240 VAC operations, and 8kW total output. The MS2012-20B has two 20-amp AC breakers built in. The M4024-PAE and MS4448-PAE have 120/240VAC split-phase output, eliminating the need to stack two units or buy a transformer to run 240-volt loads. As many as four MS-PAE inverters can be paralleled for larger systems up to 17.6kW with 120/240VAC split-phase

output (ME-RTR router required).

Mount the MS Series on a shelf or bulkhead, even upside down, or use Magnum's integration hardware in Power Systems section. The aluminum base and cover provide noise reduction and corrosion resistance. The MS Series has an RS-485 communication port and a remote control port. The MS Series front panel has an on/off switch with an LED indicator. All models have a 50-amp transfer relay. The ME-RC50 controller is required for inverter programming.

The MS Series is ETL Listed to UL/cUL 458 for mobile use and UL 1741 for off-grid installations. Dimensions: 13.75 x 12.65 x 8 inches. 3-year warranty, except MS4024-PAE and MS4448-PAE which have a 2-year warranty. Made in USA. See Power Systems section for Magnum's integration hardware for MS and MS-PAE inverters.