Products

Order Solar Power Products Online

Schneider Electric MPPT60-150

Schneider Electric XW-MPPT60-150 Charge Controller

The \MPPT60-150 can be used with PV arrays with voltages ranging from battery voltage to 150 VDC and can support an output of up to 60 amps into the battery for battery voltages of 12 to 60 VDC. Maximum power point tracking (MPPT) maximizes energy harvest and provides increased flexibility in module selection and string sizing.

A large aluminum heat sink eliminates the need for an internal fan for added reliability. Built-in ground fault protection (GFP) eliminates the need for a separate GFP breaker. The MPPT60-150 can be mounted on the side or top of the Context XW power distribution panel, or used stand-alone in other PV systems. The front panel features a 2-line 16-character display and four buttons for configuration and system monitoring. A battery temperature sensor is included with the controller.

The charge controller has a configurable single-function auxiliary output (producing 5 to 13 VDC at 200 mA) that can drive a realy for lad control or activate devices, such a vent fans or indicator alarms.

The MPPT60-150 is able to communicate its settings and activity to other Xanbus-enabled devices, such as the Context XW Series inverter/charger, the System Control Panel II (SCP), XW Automatic Generator Start (XW-AGS), and other MPPT-60-150 solar charge controllers through the Xanbus network.

The dimensions of the MPPT60-150 are 14"H x 5"W x 5"D, weight is 12 lbs and it is covered by a 5-year warranty with an otional extension to 10-years. Listed to UL 1741 for the U.S. and Canada.


Model

Description

Item code

XW-MPPT60-150

60-amp MPPT charge controller

020-08040

Order Solar Power Products Online